27
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GNACR
Working preparation
Tractor preparation
The following instructions must be carefully observed in order to get the best working
performance.
The addition of ballast water in the tires and a set of weights on the front part and rear
wheels of the tractor are the most used ways to increase the soil traction and give greater
stability to the tractor. Check if the tractor is in full conditions before using it.
Harrow preparation
Check the condition of all parts and retighten nuts and bolts, especially the ones from
the disc gangs. If the gangs work loose, they may damage the axle and other components.
Lubricate all grease fittings appropriately. (See lubrication instructions on pages 35
and 36).
Hitching to the tractor
B
A
Couple the hitch (A) to the
traction bar of the tractor and lock it
using an axle (B) and cotter pin.
Note that the traction bar must
be fixed during operation.
NOTE
The axle (B) is not included with the equipment.
