13
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GNACR
Assembly
First of all, put the parts in a clean place to identify them easier. Check the parts using
the list that comes inside the packing box.
Using the set of wrenches
NOTE
We recommend wearing gloves, especially while assembling the disc gangs.
Use two box end wrenches (A) to tighten the nuts of the disc gangs, one to hold the
axle nut on one side while the other tight the nut to the other end, thereby preventing the
axle from rotating.
Use the L shaped socket wrench (B) to tighten the nuts of the bearing bolts.
Use the L shaped socket wrench (C) to tighten the nuts of the traction unit.
C
A
B
