40
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GCRO 7010 / 7012
Assembly
Assembly of the disc gangs on the frame
IMPORTANT
• The rear gang turns earth to the left and the front gang turns earth to
the right.
In the gang assembly to the carriers,
the bearing hangers should remain facing
the disc blades concavity.
Procedures:
In the illustration below it is possible to see the assembly sequence, being:
• Place the bolt (A) with square washer (B) and pass it through the bearing housing
and through the bearing hanger hole. On top, place a flat washer (C) and nuts (D);
• Repeat this operation for other bearings.
D
D
C
C
B
B
A
A
