1
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GCRO 7010 / 7012
Introduction
The GCRO 7010 and 7012 disk harrows were specially
designed for great areas. They are ideal for the initial preparation
or for leveling the soil, with excellent application and soil
preparation for annual or perennial crops.
Their reinforced and adequate structure are made of folded
steel plates joined by a good penetration weld and fine finishing,
with resistant parts on the load concentrations.
These disk harrows feature an efficient wheelset system
with hydraulic activation to control the depth and for a safe
transportation over long distances. This wheelset system also
streamlines the maneuvers during the job.
This instructions manual contains the necessary information
for the best performance of this disk harrow. The operator must
carefully read the entire manual before working with the equipment.
Also, read and understand the safety recommendations.
For any further clarification or in the event of technical
problems that may arise during the service, consult your dealer
and the Technical Support department of the factory. They can
ensure the fully functioning of your TATU disk harrow.
