15
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GAIM
Assembly
Disc gangs assembly sequence
• Place the outer washer (A) along with the axle (B).
• Tighten the nut (C) passing 5 mm from the axle face.
• Place the disc blades (D), bearings (E) and spacer spools (F), following the
instructions on page 14.
• Place the inner washer (G) and the other nut (C-1).
• Place the bolt (H) that fasten the lock nut (I), along with a spring washer and nut
(only on the outer side of the gangs).
• Use the wrenches (A) from page 13 to tighten the gangs, as follows:
1º) Place one of the wrenches on the outer side of the gangs (locked side), supporting
it on the ground.
2º) On the inner side, use the other wrench and tighten the gangs to get maximum
torque.
3º) To tighten, the gangs must remain underpinned with a piece of wood or another
object, preventing them from moving.
• Lastly, place the bolt (H-1) and position the lock nut (I-1), fastening with a spring
washer and nut.
IMPORTANT
• Check the correct side of the bearings and spacer spools according
to the concavity of the disc blades.
Grease fitting or plug
Summary of Contents for GAIM
Page 1: ...INSTRUCTIONS MANUAL GAIM...
