13
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GAIM
Assembly
Using the set of wrenches
NOTE
We recommend wearing gloves, especially while assembling the disc gangs.
Disc gangs assembly
Before starting to assemble the disc gangs, check the correct position of the bearings
and spacer spools, according to the following steps:
Use two box end wrenches (A) to tighten the nuts of the disc gang, being one to
hold the axle nut on one side while the other tighten the nut to the other end, thereby
preventing the axle from rotating.
Use the L shaped socket wrench (B) to tighten the nuts on the bearing bolts.
Use the box end wrench (C) to tighten the nuts of the traction set.
B
C
A
First of all, put the parts in a clean place to identify them easier. Check the parts
using the list that comes inside the packing box.
Summary of Contents for GAIM
Page 1: ...INSTRUCTIONS MANUAL GAIM...
