54
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
ATCR / ATCRL / GAICR / GAICR 300
• To carry out any verification on the equipment, lower it to the ground and shut
down the tractor engine.
• Whenever unhitching the equipment, do it on a flat and firm place and use the
jacks.
• Carry out the operations on a controlled and careful manner.
• Before maneuvering at the edge of the field, activate the hydraulic cylinder
gradually to lift the disc gangs.
• During working, do not maneuver without totally lifting the disk harrow as the
angle formed by the disc gangs could require a great effort from the equipment,
what would overload the traction components.
• Relieve the control valve pressure before disconnecting the quick couplers and
when doing any verification in the hydraulic circuit or on the retention valve.
• Do not check eventual leaks using your bare hands, as the high pressure may
cause body injury. Use a cardboard or any other suitable object.
• As previously mentioned, these disk harrows have several settings. However,
only the local conditions can determine their best adjustment.
Adjustments and operations
Operations - important points
