background image

UP051-EN  Nozzle FN-1025 - Instruction and Maintenance Manual_rev2.docx                                                     

 

 
 
 
 
 
 

5.   Don't leave the place while refuelling. 

 

  

If the automatic shut off mechanism doesn't work due to mechanical trouble, 

fuel overflows to cause fire. 

 

  

Stop pump immediately if oil overflows. 

 

   

It is required to attend while refuelling by the fire regulation.

 

 

 

 

 

6.   Don't fuel to another container than specified. 

 

   

Do not fuel gasoline into nonconductive plastic container or the like.

 

 

 

When contained in a plastic container, it may cause fire due to static 

electricity.

 

 

 

  

 

 

7.   Return nozzle lever securely. 

 

  

After fuelling completely, return the nozzle lever fully to the initial position.

 

 

  

Otherwise, fuel may pour out when starting next operation.

 

 

  

 

8.   Tighten fuelling cap. 

 

  

After completion of fuelling, tighten fuelling cap securely. 

 

 

Or the fuel may escape through loose cap while driving to cause slip 

accident or fire.

  

 

 

 

 

9.   Set the nozzle in the right direction.  

 

   

Automatic shut off function of the nozzle may not work properly if 

refuelling with the sideways or the inverse attitude.

 

 

 

     

 

10.   Do not allow children to pump gasoline. 

 

 

 

 

Keep children away from the dispenser area. 

 

 
 
 
 
 
 
 
 
 
 
 

HINTS AND TIPS FOR SAFE USE 

Summary of Contents for ULTRA FN-1025 Series














Reviews: