background image

UP051-EN  Nozzle FN-1025 - Instruction and Maintenance Manual_rev2.docx                                                     

 

- 7 -

 

 

 

 
5-1.  Warranty period 

 

  

 TATSUNO guarantees against defective materials and manufacturing during warranty period.     

 

   

Warranty period: One year from date of supply.  

If the delivery date cannot be established, the date code on the nozzle prevails. 

 

   

Warranty does not cover below. 

(1) Damage to the nozzle & swivel in an accident etc. 

(2) Damage by natural disasters, such as a typhoon and an earthquake. 

(3) Wear items such as spouts, vapour recovery boots, scarves or grip covers. 

 

5-2.  Replacement period 

 

Nozzles are expendables. Even if there is no abnormality, we recommend replacement after use of the 
nozzle & swivel for three years or the quantity of refuelling 2,500,000L. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

If you have any suggestions as to how we can improve the quality and/or 
readability of this manual, then we would be happy to hear from you. We 
can be contacted at the following address: 
 
International Marketing Department 
TATSUNO CORPORATION 
1-1, Kasama 4-Chome, Sakae-ku, Yokohama-shi, Kanagawa 
Japan 
FAX : 81-45-893-4680

 

 

No part of this manual may be copied or reproduced in any form or by any 
means without prior written consent of TATSUNO CORPORATION. The 
information in this manual is subject to change without notice and should 
not be construed as a commitment by TATSUNO CORPORATION. 
TATSUNO CORPORATION has taken great effort to verify the accuracy 
of this manual but assumes no responsibility for any technical inaccuracies 
or typographical errors. 

© TATSUNO 

CORPORATION

. All rights reserved

.

 

Suggestions

 

5.  Guarantee and Replacement Period 

Summary of Contents for ULTRA FN-1025 Series














Reviews: