BACK PANEL RT - 14
7
9.1 Alarm screens
Alarm screens
is not seen till the following alarm situation takes place:
1. Damage of the temperature sensor of the boiler (T1)
2. Damage of the temperature sensor of the WAW (T2). The alarm doesn
’
t start if the sensor is not
installed
3. Damage of the temperature sensor of the mixer (T3) if the controller is in the FLOOR mode
4. The STB safety thermostat switches on
5. Exceeding the acceptable temperature of the boiler set by the
“
”
parameter.
6. Exceeding the acceptable temperature of the floor heating set by the
”
parameter if the controller is in the FLOOR mode
The alarm situation is stored in the memory of the controller (even after powering off the
controller as well), sound signal is generated and the red ALARM diode blinks. Pressing the F2
button turns off the sound and the F1 button cancels alarm and if the cause of the alarm is
eliminated restores the normal operation ( the STB safety thermostat turns off after cooling to
approx. 70 C).
Further blinking of the ALARM diode means the cause of the alarm has not been removed. During
ALARM the controller lowers the boiler temperature by switching off the blower and switching
<21> TempALARM_BOILER
<61> TempALARM-
FLOOR”
o
9.2 Screen of boiler operation
The screen features current temperature of the boiler and rotation of the blower
Fig.82 Screen of boiler operation
18
WARNING!!!
WE INFORM THAT THE RT-14 CONTROLLER MAY BE USED ONLY TO THE APPOPRIATE
DEVICES.
ALL THE REQUIREMENTS IN TERMS OF TECHNICAL NORMS AND CURRENT
BUILDING LAW THAT RELATES TO THE CORRECTNESS OF HEATING AND STOVE-
FITTING SYSTEMS PROCESSING STOVE INPUTS MUST BE MET.
IMPROPER USE OF THE CONTROLLER MAY CAUSE THE DAMAGE OF THE
CONTROLLER OR IN EXTREME CASES THE STOVE INPUT ITSELF AND THE HEATING
SYSTEM HANDLED BY THE STOVE ALONG WITH THE COOPERATING DEVICES.
Alarm
content
F1=Cancelling
alarm
F2=Switching off
sound alarm
Fig.81 Alarm screen
Icons of
additional
data
Boiler
temperature
Icon of
BOILER screen
Blower
rotation
Preset
temperature
F1=setting
the basic
parameters
F2=Start/Stop
of boiler
operation
Temperature of
flue gas
BLOWER
MAINS
INPUT
DMUCHAWA
1,5A/230VAC
WEJ: 230V~/50Hz/4,5A/1035VA
F6,3A
SIEĆ
MIESZACZ
1A/230VAC
POMPA
MIESZACZA
1A/230VAC
®
Pb
5 x 0,5mm
2
3 x 0,5mm
2
MIXER
PUMP of
the MIXER
room thermostat
boiler sensor
sensor of the mixer
safety sensor STB
WAW sensor
black
br
own
blue
yellow-gr
een
yellow-gr
een
blue
br
own
320mm
Connection plate of the mixing valve and the mixer pump
mixer pump
mixing
valve
