8
Stages
Sediment, Pre-carbon, Sediment, RO,
Post-carbon, UV
UV lamp wattage
11W
Auto-flushing system
Yes
Weight
11.5 Kgs
Tank Volume
7 Liters
Membrane Type
TLC™ (Thin Layer Composite)
Booster Pump voltage
24V DC
Mains voltage
160-270V AC
**As per standard test conditions. 10 psi input pressure and 750ppm TDS at 25degC.
While our Service Technicians are trained to follow the installation safety guide,
it is imperative that you are aware of them
1. Match the packaging list with the items in the box
2. Always ensure that the Tata Swach Silver RO purifier is installed by a trained
technician
3. Tata Swach Silver RO purifier must be wall-mounted
4. Do not install the purifier directly above an electric socket
5. Ensure you use the plug provided with the purifier and do not change it
unless recommended by Company’s service technician
6. The length of the water inlet hose must be shorter than 3 meters to ensure
sufficient pressure is available to the machine.
7. Always connect only with cold/normal water inlet only. Do not use with hot
water.
8. Do not confine water purifier in a cabinet
9. Input water pressure needs to be between 5 PSI and 35 PSI. In case it is more
than 35 PSI, you need to use a “pressure reducing valve” and in case it is less
than 5 PSI, you need to use a “pressure booster pump”. Either can be bought
from the market or from the Company technician at an additional cost.
10. Inlet water TDS should not exceed 2000 ppm. Hardness should not exceed
500 ppm.
11. Ensure the inlet, outlet and drain connections are properly connected and
that the drain point is not blocked.
10
GENERAL INSTRUCTIONS
