TATA Motors TATA, User Manual

Page: 41 / 76

41
Note:
If a Bluetooth
®
process is currently taking place (e.g.
registering a device or downloading a phone book),
you cannot open the
Bluetooth
®
menu for the duration
of the process. A corresponding message appears on
the display. To return to the current audio source,
press the
DIS ESC button (6).
Registering the cell phone
The device can be registered with up to 5 Bluetooth
®
cell
phones or other devices such as MP3 players. If you
register a sixth one, the
Bluetooth
®
device registered first is
unregistered.
To register a cell phone,
 open the Bluetooth
®
menu.
The "PAIR" menu item is selected.
 Press the OK button (4) to call up the menu item.
The Device menu opens. The "PHONE" (cell phone) menu
item is selected.
 Press the OK button (4).
The display shows the PIN number for the Bluetooth
®
connection. The Bluetooth
®
cell phone can now be
registered.
 If requested, enter the PIN displayed in your cell
phone.
The car sound system independently establishes a
Bluetooth
®
connection to the cell phone that was registered
last and is available. While the Bluetooth
®
connection is
being established, the Bluetooth
®
symbol flashes on the
display. If the connection has been established, "DEVICE
CONNECTED" is briefly shown on the display, and the
symbol for the
Bluetooth
®
signal strength appears. If no
connection could be established, then "CONNECTION
FAILED" is displayed.
Notes:
 The time required for the connection is dependent
upon the cell phone and can differ from cell phone
to cell phone.
 The Bluetooth
®
signal strength is displayed only if
it is supported by the connected cell phone.
Automatic connection of the cell phone
During switch-on, the car sound system automatically
attempts to establish a
Bluetooth
®
connection to the cell
phone connected last or to the first device in the list of
registered devices.
After the connection is established, "DEVICE
CONNECTED" briefly appears on the display.
If the connection cannot be established, the display shows
a corresponding message:
 CONNECTION FAILED – DEVICE NOT FOUND: The
car sound system cannot find the cell phone, e.g.
because the cell phone is switched off or its
Bluetooth
®
function is deactivated.