TATA Motors TATA, User Manual

Page: 21 / 76

21
 Switch between the settings with the rocker switch
or (8).
 "TRAFFIC" : Priority on.

"TRAFFIC" : Priority off.

Press the OK button (4) to select a different function,
or press the DIS ESC button (6) to exit the menu.
Note:
For the device to switch through traffic reports, a
station must be defined that supports TA or belongs to
a broadcasting network with traffic information stations.
A signal tone appears if you leave the broadcast area of
the traffic information station or switch to a station that
does not support the traffic information priority. If a different
audio source than the tuner is active, the device
automatically searches for a traffic information station in
the background.
Skipping a traffic announcement
To cancel a traffic announcement without switching off the
priority of traffic announcements,
 press the DIS-ESC button (6).
The previously active audio source is played again. If a
traffic announcement is broadcast again, the device
automatically switches it through again.
Receiving an alternative frequency of a
station
Note:
The functions Alternative Frequency and Regional are
available only in FM mode for the tuner region
EUROPE.
The device can automatically switch to the best alternative
frequency of the same station if the reception becomes
poor.
Allowing/preventing alternative frequencies (RDS)
To switch RDS on/off,
 press the MENU button (13).
The Tuner menu opens, the "RDS" function is selected.
 Press the OK button (4).
 Switch between the settings with the rocker switch
or (8).
 "RDS" : RDS on, allowing alternative
frequencies.
 "RDS" : RDS off, preventing alternative
frequencies.
 Press the OK button (4) to select a different function,
or press the DIS ESC button (6) to exit the menu.