TATA Motors TATA, User Manual

Page: 17 / 76

17
Tuning into a station
There are 3 ways of tuning into a station:
 Tuning into stations automatically (station seek tuning)
 Tuning into stations manually
Selecting stored stations
Station seek tuning
 Press the rocker switch or (8).
Note:
If you press and hold the rocker switch or (8),
automatic seek tuning skips the stations found until
you release the rocker switch again.
The tuner searches for the next receivable station in the
current waveband. The adjusted sensitivity of the station
seek tuning (section "Changing the seek tuning sensitivity")
and the following settings are taken into consideration:
 "PTY TYPE" setting in the "TUNER" menu (only in FM
mode for the tuner region USA and EUROPE): The
tuner seeks stations that are broadcasting the set
programme type.
 "TRAFFIC" setting in the "TUNER" menu (only in FM
mode for the tuner region EUROPE): The tuner sets
exclusively traffic information stations with priority for
traffic announcements.
Tuning into stations manually
Note:
For the tuner region EUROPE, the manual setting of
stations is possible only if the RDS functions are
deactivated. If the RDS function is activated, you can
scroll in the broadcasting networks in whose reception
area you are located.
 Press the rocker switch or (8) once or several
times to change the frequency in small steps.
Selecting stored stations
 Select the desired waveband or memory bank.
 Press one of the station buttons 0 - 9 (9).
Or in the List menu:
 To change to the menu mode, press the DIS-ESC
button (6).
The "List" menu is selected.
 Press the rocker switch or (8) to select a
frequency or station from the list.
 Press the OK button (4).
The stored station is called up, provided that it can be
received at the current vehicle position.
The frequency of the station or the station name appears
on the display.