MAINTENANCE & CAR CARE — Starting With Jump Leads
Connect leads in the order as shown in the sketch :
•
Do not connect the lead to the negative terminal of the discharged
battery.
•
The connection of the -ve lead point should be as far away from
the discharged battery as possible and close to the starter motor
on engine/transaxle.
•
Route the leads so that they cannot get caught by the rotating
parts in the engine compartment.
•
The engine of the car providing the jump start can be allowed to
run during starting.
Attempts to start the engine of the car with the discharged battery
should be made at intervals of one minute and should not last more
than 15 seconds. After starting, allow both engines to idle for
approximately 3 minutes with the leads still connected.
98
Another Car Battery
(Jump Start battery)
Body
Earthing
Body
Earthing
+
_
+
_
Discharged
Battery
Ofrecido por www.electromanuales.com
