TATA Motors Harrier XE, Owner'S Manual

Page: 86 / 224

DASHBOARD AND FEATURES
76
7. Head lamp leveling rotary switch
Inner rotary switch on right hand stalk is
provided for head lamp leveling. With the
inner rotary switch, Head lamp leveling
can be done with head lamp in Low
Beam and in ‘ON’ position. Select cor-
rect position before start of trip and ve-
hicle is stationary. Depending upon the
number of passengers and luggage in
the vehicle headlamp focus may change.
This can be adjusted by rotating the
knob to one of the
3
level positions.
Combi-Switch (LH Stalk)
0)
‘
OFF
’
Position
The wiper is switched ‘ OFF ’.
1) Intermittent wipe
Push the stalk upwards to op-
erate intermittent wipe.
Inner rotary switch on left hand
stalk is provided for intermittent front
wiper delay. The switch has
5
delay tim-
ers.
2) Slow Wipe
Push the stalk towards position
(2)
for
continuous slow wipe.
3) Fast Wipe
Push the stalk towards position
(3)
for
continuous fast wipe.
4) Flick wipe (spring return)
Pull the stalk downwards and
hold it for continuous wipe, the wiper
continuously wipes across the wind-
shield at low speed till the stalk is re-
leased.
5) Front Windshield Washer

Pull the lever little longer,
washer fluid will be
sprayed on the windshield.

The windshield wipers operate for
3
cycles after the lever is released and
1
more cycle after
5
seconds.