TATA Motors Harrier XE, Owner'S Manual

Page: 133 / 224

STARTING AND DRIVING
123
NOTE

If Smart key is inside the vehicle
and on pressing start stop
switch, if start stop switch green
LED blink for
10
sec. duration
then rotate steering wheel and
simultaneously press start stop
switch again.

If smart key is inside the vehicle
and on pressing start stop
switch, if start stop switch green
LED blinks more than
10
sec. du-
ration then contact authorized
TATA MOTORS dealer.

If ESCL (Electronic Column Steer-
ing Lock) is not unlocked
properly, then vehicle doesn’t go
into ACC mode
Backup start
If smart key battery voltage is low or
empty and vehicle is in OFF mode then
to start the engine user needs to press
start/stop button two times with interval
of
2.5
sec. between two switch press af-
ter pressing the clutch pedal OR brake
with valid smart key near Immobilizer an-
tenna (located below front cup holder).
Emergency start
If vehicle engine is switched from ON to
OFF and Start Stop button is pressed
with clutch press within
5
sec, Engine
gets crank.
NOTE
If ESCL (Electronic Column Steer-
ing Lock) is not unlocked properly,
then Engine will not get cranked.

Single Press Start:
1.
Bring the smart key with you and sit
in the driver seat.
2.
Press the clutch pedal and then
press the start-stop switch.
3.
Green colour LED on start-stop
switch turn ON.
4.
Once engine started successfully,
green colour LED on start-stop switch
remains ON.

Two Step Start:
a) Step 1
1.
Bring the smart key with you and sit
in the driver seat.
2.
Press the start-stop switch without
pressing clutch pedal.
3.
Amber colour LED on start-stop
switch turns ON.
4.
Engine will remain OFF and all elec-
trical equipment and infotainment