TATA Motors Harrier XE, Owner'S Manual

Page: 111 / 224

CLIMATE CONTROL
101
NOTE

Condensation may drip from the
underside of the vehicle when it
is in cooling mode. Traces of wa-
ter on the ground are normal
and are not a sign of leakage or
malfunction.

Ventilate the vehicle for a brief
period during warm weather.
This will speed up the cooling
process and the desired vehicle
interior temperature will be
reached quickly.

Never cover the air vents or air
intake grilles in the vehicle inte-
rior.

If the AC is not used for a long
period, such as during winter, it
may not give the best perfor-
mance when you start using it
again. Operate the AC at least
once a month to maintain opti-
mum performance.

While starting the vehicle itself
after long duration (more than
15
days), following procedure
needs to be followed to meet AC
performance.
-
Start the vehicle with AC &
Blower in OFF condition in
idling for
2~3
minutes.
-
Then switch ON the AC &
Blower and run it for another
2~3
minutes in idling for
proper circulation of refriger-
ant & oil to lubricate the inter-
nal parts of AC system.

Rear blower will be effective af-
ter
5-10
min of front HVAC run-
ning (after cabin cooling).
E. Air distribution control
This is to select the air distribution pat-
tern as described in the table.
Directs air through the cen-
ter and side air vents
Directs air through the cen-
ter, side and foot well vents
Directs air through the foot
well air vents
Directs air through the de-
froster & foot well vents
(Default fresh air mode)
Directs air through the de-
froster vents (Default fresh
air mode)
Directs fresh air enters in
the compartment.