TATA Motors Aria, Owner'S Manual & Service Book, Page: 63 / 172

DRIVING CONTROLS
53
INSTRUMENT CLUSTER
1) Instantaneous Fuel Consumption :
Updates display “Instantaneous Fuel
consumption” at regular time interval.
Instantaneous Fuel Consumption display
is available in “Km/l” or
“L / 100km” which can be selected by
user by using “
Dispaly Information Control
(DIC)
& Trip” switches (Ref. Switch
functions).
Instrument Cluster displays
“Instantaneous Fuel Consumption
data” only when the below
conditions are met :
• Cluster display “ - . -" when ignition
‘ON’ and engine ‘OFF’.
• Your vehicle’s speed is more than
10 Km/h.
• Your car should have covered 20
meters after switching ON the ignition.
• Cluster displays “ - . -" till the above
conditions are met.
2) Average Fuel Consumption:
This function updates the display
“Average Fuel consumption” since it was
last reset.
Average Fuel Consumption display is
available in “Km/l” or “L/100km” which
you can select by using “
Dispaly
Information Control (DIC)
& Trip” switches
(Ref. Switch functions).
Distance covered is more than 500
meters. It refresh the value every 10
seconds.
3) Range (Distance to Empty) (DTE):
Range option indicates distance that
your car can travel with available fuel in
tank under current Average Fuel
consumption rate and it displays as
“km”.
Cluster starts updating Range data
only when the below conditions are
met :
• Engine speed is more than 0 RPM
• Vehicle speed is more than 0 Km/h
• Cluster displays the same / current
DTE values unless and until the car
starts moving.
Outside Ambient Temperature:
Outside Ambient Temperature is
measured and displayed in the units °C
or °F, which you can select by pressing
the “
Dispaly Information Control (DIC)
&
Trip” switches (Ref. Switch functions).
If your car’s speed is less than 30 Km/
h, the displayed “Outside Ambient
Temperature" value may not be
accurate.