TATA Motors Aria, Owner'S Manual & Service Book, Page: 122 / 172

IN CASE OF EMERGENCY
112
Resetting the Inertia Switch :
1. Open the Front Right Door (for LHD
Models). And reach out in the area
below the glove box as shown in the
image below.
In Case of Emergency :
Your ARIA is fitted with an Inertia Switch,
which will trigger if the vehicle is brought
to an abrupt halt, normally during a
collision. Normal driving and even sudden
braking will not trigger the inertia switch.
When the Inertia Switch is triggered the
following will happen
z
All the doors will be unlocked.
z
All the turn indicators will flash (both
Left Side and Right Side).
z
All the roof lamps will be turned ON.
To undo the above affects you have to
reset the Inertia Switch as shown below.
WARNING
After resetting the switch and before
resuming driving, check for any
damage to the body or check if any
part is hanging loose. Also, after
turning ON the ignition, ensure that no
faults are displayed in the instrument
cluster
2. Reach out for the Inertia Switch
through cut-out (opening) and press
it.
NOTE
Although the Inertia switch cannot be
seen, it can be easily located by the
cut-out (opening) provided in the top of
the lower A’ Pillar trim.
RESETTING INERTIA SWITCH