TATA Motors Aria, Owner'S Manual & Service Book, Page: 51 / 172

DRIVING CONTROLS
41
COMBI-SWITCH
downward. For changing lanes, lightly
flip the stalk downwards.
Left turn signal :
Left indicator lamps and instrument
cluster tell tale will come ‘ON’ if ignition
is ‘ON’ and indicator stalk is moved to
upward. For changing lanes, lightly flip
the stalk upwards.
Flash function :
Pull the lever towards steering wheel to
flash the hi-beam head lamps and it will
remain ‘ON’ till lever is in pulled position.
The lever will return to it’s original
position after releasing the lever.
Hi-Beam :
To switch over head lamps to hi-beam :
✦
Master light switch to head lamp
position.
✦
Push the lever towards instrument
cluster.
✦
Hi-beam headlamps and instrument
cluster tell tale will come ‘ON’.
To switch over from high beam to low
beam, PULL the lever back towards the
steering wheel.
TRIP, FUEL, SET functions :
Reset Switch
Display Information Control
(DIC) Switch
By rotating the outermost ring of the
Combi Switch, you can set the TRIP,
FUEL and SET functions that are
displayed on the instrument cluster. To
reset / scroll the values of the Trip meter,
press the outermost switch on the stalk.
(Please refer to Instrument Cluster
section to know more about these
functions).
Cruise master ON / OFF switch :
Cruise Master ON/OFF Switch
If you want your vehicle to maintain a
particular, constant speed, rotate knob
on the right stalk to ‘ON’ position to
activate the cruise function. This
function is controlled by the Steering
Wheel switches.
(Please refer to
Cruise Control section for details).
(As applicable)