TATA Motors Aria, Owner'S Manual & Service Book, Page: 120 / 172

IN CASE OF EMERGENCY
110
JACKING THE VEHICLE & CHANGING WHEEL
mm ahead of the rear wheel. Slowly lift
the vehicle with the help of jack handle.
Remove wheel-mounting nuts and take-
out flat tyre.
Roll the spare wheel into position and
align the holes in the wheel with studs.
Reinstall the wheel nuts (taper end
inward) and tighten them as much as
you can by hand.
NOTE
Before using the jack, please read the
instructions on the sticker provided on
the jack.
Lower the jack completely and tighten
the wheel nuts one by one using wheel
spanner. Press fit the wheel cover back
(if fitted).
Restore all the tools and jack at their
respective location.
Place the flat tyre at spare wheel
location and place the anti-theft lock to
its place.
CAUTION
Check and correct tyre pressure and
nut tightness of the changed wheel as
per recommendation at a nearest
service station. Get the flat tyre
repaired at the earliest.