TATA Motors ALTROZ BS VI 2021, Owner'S Manual

Page: 204 / 248

196
SMART KEY BATTERY REPLACE-
MENT (for PEPS variant)
Procedure
Open rear side of key (battery cover). 1.
Replace with new battery in the smart 2.
key battery slot.
Ensure that the “+” symbol on the bat-
3.
tery is facing upwards. The correct po-
larity is shown on the battery cover.
Close the battery cover.
4.
Make sure that the key cover is intact 5.
properly.
WEARABLE KEY BATTERY RE-
PLACEMENT PROCEDURE
Battery status of the wearable key fob:
If customer presses the driver door •
handle switch or tailgate switch for 2-3
times with valid wearable and if the
passive entry is not working, the wear-
able key fob’s battery is low.
As standby he can use Smart Key
•
(UID) or emergency key for entry
Customer to contact nearby dealer or
•
service station for battery replacement
Battery Specification
Lithium Battery CR1632 •
Voltage 3V •
Make: Panasonic, Renata •
Battery Replacement
Remove the screws from backside of •
wearable key fob.
NOTE
Use CR 2032 battery only. •
An inappropriately dis-posed battery •
can be harmful to the environment
and human health. Dispose the bat-
tery according to your local law(s)
and regulation.
NOTE
Battery life is 10 months or 25,000 PKE
cycles (whichever comes earlier.
MAINTENANCE