6
COT
BASSIN
ET
COT
BASSIN
ET
Step 1 - Attach the base to one of the side panels
Attach the base to one
of the side panels.
Note the base position
needed for either ‘cot’ or
‘bassinet’.
Secure the base and
side panel at each
end with the connector
screws and metal cross
dowels.
Lightly hand tighten
each connector screw.
Do not fully tighten the
screws just yet.
Hardware needed
2 x 70mm connector screws
2 x metal cross dowels
x2
x2
Hint: For this step, hold the metal
cross dowel in place while you
insert the connector screw. Twist
the cross dowel around so that the
hole in the cross dowel lines up
with the screw.