10
Step 4 - Attach the lattice base frames
Unfurl the lattice base frames.
Note: Do not cut the fabric
webbing that holds the slats
together.
Fit the lattice base frames
between the bed rails. To
secure the frames, stretch the
the corresponding dowel pins.
slats of the base frame
over the dowel pins.
Do not cut the
fabric webbing
Step 3 - Attach the bed rails to the bed heads
Temporarily attach the
bed rails to the bed
heads.
To do this, align the
three wooden dowels
at the end of the bed
rails with the holes on
each corner post.
Secure each corner
with the lunar washer
and connector screw.
Lightly hand tighten all
screws at this stage.
Hardware needed
4 x 50mm connector screws
4 x lunar washers
