6
7
8
Fit The Guard Screws
Tighten All Bolts
Lowering And Raising The Adjustable Panel
Maintaining Your Tasman Eco Cot
IMPORTANT: The guide channels (both sides) must now be secured using the 2 guard screws. The guard
screws prevent damage being caused to the side frames by preventing the front adjustable panel from being
accidentally removed or dislodged from the bed head frames. This is also an important safety feature.
50mm guard screws must
be fitted to both sides
The guard screws must be installed to prevent damage to the timber frames
Tighten all connecting bolts.
Do not overtighten or you may
damage the timber.
To clean, wipe down with a soft cloth and soapy water.
Avoid scourers and steel wool as these will damage the finish.
Two months after assembling the cot, re-tighten all connector
bolts as some may loosen as the cot settles.
TM
TM
TM
DO NOT OVERTIGHTEN
Tighten both sides but do
not overtighten
Assembly is now complete
You can lower the front panel with only one hand. First lift it slightly,
then while the panel is raised, push the bottom of the panel
inwards with the side of your leg. Now slowly lower the panel.
To raise the side, simply lift it up with both hands until you hear it
click. The springs will automatically lock back into place.