TasmanEco Sleigh Assembly & Instruction Manual Download

Page: 4 / 8

Connect Bed Heads To Base

Fit Double Ended Screws To Unused Holes

• Connect the base to the left bed head. Ensure the sides of the beds heads with

the metal glide pins inserted are facing the correct way for this stage of assembly.

Screw the two sections together using 2 bolts, but do not fully tighten.

• Now connect the right bed head to the base. Screw the sections together using 2

bolts, but do not fully tighten.

When building the Cot, use locating holes “Cot”

When building the Bassinet, use locating holes “Bassinet”

Use the double ended screws to fill the four unused locating holes - one in each corner of the

cot. This is required to prevent the entry of small fingers into these holes.

THIS SIDE UP

ssi

Cot

Bas

sin

Cot

Bas

sin

ssi

Sides with glide pins must face

downwards for this stage of

assembly

Summary of Contents for Sleigh

Page 1: ...haise Lounge Save these instructions for future reference Assembly of this furniture is best undertaken by two people Assembly Instructions TM TM SJC Brands Pty Ltd abn 58 106 988 578 Unit 4 1 Reaghs Farm Rd MINTO NSW 2566 p o box 5878 MINTO DC NSW 2566 t 02 9603 5000 f 02 9603 7000 e info tasmaneco com au w www tasmaneco com au ...

Page 3: ... Up and must be facing DOWNWARDS for this stage of assembly Insert the metal cross dowels into the four holes in the base The screw heads must face upwards Align the horizontal holes using a screwdriver as shown 1 2 Fit the glide pins and split washers to the four threaded inserts Tighten firmly using a screwdriver but do not overtighten DO NOT OVERTIGHTEN ...

Page 7: ...e the adjustable front panel from the bed head frames Remove the glide pins and split washers from the bed head frames Store these parts in a safe place Retighten the bolts Do not overtighten Place a throw rug over the mattress add a few colourful pillows and your child has their very own chaise lounge where they can read rest or play TM TM Loosen both sides Tighten both sides ...