OPERATION 15
Never
commence work until the daily service checks have been
carried out.
STARTING THE ENGINE
Petrol Driven Units
Read the engine operators manual before attempting to start the
engine.
Connect the inlet/suction hose to a suitable tap or completely
immerse the inlet filter in the tank or sump. Turn on the tap
Ensure the lance is securely stowed
Turn on the fuel tap.
Close the choke lever, do not use the choke if the engine is warm or
the ambient air temperature is high.
Turn the engine on/off switch to “on”
Move the throttle lever slightly to increase the speed, do not fully
open the throttle at this stage.
Pull the starter grip lightly until resistance is felt, then pull briskly. Do
not wrap the starter cord around the hand, serious personal injury
could be sustained if the engine “kicks back” or backfires.
Open the choke as the engine warms up.
Prime the water pump as described above.
Open the throttle to the fully open position.
Do not allow the engine to run for more than 5 minutes with the
trigger gun closed, the water temperature will rapidly rise and will
cause damage to the water pump seals.
MODEL PW200 ONLY
As water enters the pump it will discharge through the EASYSTART
valve in the pump to atmosphere, this is correct. When the trigger
