Taski swingo 855B power Technical Manual Download Page 32

Page: 32 / 79

GTS

Technical Manual

15. March 2010

Edition: V1.00/2010

5-11

05.0 s

go 855 B Power - me

anics

.fm

5.1.2 Squeegee lowering mechanism

5.1.2.1 Replacing of squeegee bracket spring

Picture 2: Squeegee lowering

Remove

•

Remove the squeegee from the fixation.

•

Remove the tool from the brush drive unit.

Remove screws (03/103) from support (03/101).

Put the bracket in working position (down).

Remarks

Lift up the rear of machine and incline it to the front to loosen the

tension of the spring.

Remove one circlip of rear axle.

•

Remove the rear axle.

Remove pressure spring.

Mount

•

Assemble new pressure spring.

•

Assemble the rear axle.

•

Position the circlip on the rear axle.

Ensure that the slide bearings are proper positioned.

•

Move the squeegee bracket to semi transport position.

•

Assemble the screws.

Service

Apply lubricant locking on the screws (03/103).

To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com

Summary of Contents for swingo 855B power
















































































Search results

Summary of Contents for swingo 855B power

Reviews:

Related manuals for swingo 855B power

Brands by name

Popular brands

Taski swingo 855B power, Technical Manual

Search results

Summary of Contents for swingo 855B power

Reviews:

Related manuals for swingo 855B power

Brands by name

Popular brands