Taski swingo 1255B Power Technical Manual Download Page 53

Page: 53 / 110

GTS

Technical Manual

19. April 2010

Edition: V1.00/2010

5-32

05.0 s

go 1255 B Power - me

anics

.fm

brush belt.

•

Position the fixation screw and tighten the center screw of the

clamping piece.

Adjustment

Turn the coupling hubs (07/128) by hand in opposite direction to

ensure that the belt is correctly mounted and stays in the middle of

the pulley.

•

Mount the bracket (07/146), position the screws of the buffer

and tighten them.

•

Position the protective cover onto the brush unit.

•

Position and tighten the five screws of the protective cover.

Ensure that the brush belt does not touch the cover.

•

Position the decoupling bow.

•

Mount the tension springs of the decoupling bow.

•

Complete assembling according to chapter REPLACING OF

BRUSH DRIVE UNIT.

Summary of Contents for swingo 1255B Power


































































































Search results

Summary of Contents for swingo 1255B Power

Reviews:

Related manuals for swingo 1255B Power

Brands by name

Popular brands

Taski swingo 1255B Power, Technical Manual

Search results

Summary of Contents for swingo 1255B Power

Reviews:

Related manuals for swingo 1255B Power

Brands by name

Popular brands