©Copyright Task Force Tips LLC 2002-2020
2
LIN-040 November 30, 2020 Rev15
TABLE OF CONTENTS
1.0 MEANING OF SAFETY SIGNAL WORDS
5.1.1 METRO 0 & 1 LEVER TYPE FLOW CONTROL (SLIDE VALVE)
5.1.3 METRO 2 LEVER TYPE FLOW CONTROL (BALL VALVE)
5.1.5 IMPULSE TRIGGER FLOW CONTROL
5.1.5.2 IMPULSE FLOW CONTROL SPEED ADJUSTMENT
5.1.5.3 NORMAL OPERATING POSITION
6.1 FOAM ASPIRATING ATTACHMENTS
7.0 COLOR CODED HANDLE COVER AND PISTOL GRIPS
7.1 IMPULSE TRIGGER VALVE SYSTEM NOZZLE COLORED PISTOL GRIPS
9.2 FIELD LUBRICATION (SLIDE VALVE AND PATTERN CONTROLS)
9.3 IMPULSE TRIGGER VALVE LUBRICATION
10.0 EXPLODED VIEWS AND PART LISTS
11.0 OPERATION AND INSPECTION CHECKLIST
The member companies of FEMSA that provide emergency response
equipment and services want responders to know and understand the
following:
1. Fire
¿
ghting and Emergency Response are inherently dangerous activities
requiring proper training in their hazards and the use of extreme caution
at all times.
2. It is your responsibility to read and understand any user’s instructions,
including purpose and limitations, provided with any piece of equipment
you may be called upon to use.
3. It is your responsibility to know that you have been properly trained in
ghting and /or Emergency Response and in the use, precautions, and
care of any equipment you may be called upon to use.
4. It is your responsibility to be in proper physical condition and to maintain
the personal skill level required to operate any equipment you may be
called upon to use.
5. It is your responsibility to know that your equipment is in operable
condition and has been maintained in accordance with the manufacturer’s
instructions.
6. Failure to follow these guidelines may result in death, burns or other
Fire and Emergency Manufacturers and Service Association
SUPPORTING MATERIALS
The following documents contain supporting safety and operating
information pertaining to the equipment described in this manual.
TASK FORCE TIPS, Inc.
3701 Innovation Way, Valparaiso, IN 46383-9327
800.348.2686 • 219.462.6161 • Fax 219.464.7155
Instruction: Pistol Grip
Replacement Kit
www.tft.com
1) Remove old grip from valve body
by inserting a 5/16" ball-point hex
driver into the bottom of the grip
and unscrewing the mounting screw.
2) Remove the mounting screw, washer,
grip, and spacer.
3) Wipe the screw thread clean to remove
any debris.
4) Place the washer on the clean screw
and insert the screw into the bottom
of the new pistol grip so that it protrudes
through the hole in the middle.
5) Place the spacer on top of the new grip
so that the screw protrudes through the
hole in that as well.
6) Place enough adhesive on the threads
of the mounting screw so that the first
five threads are 'wetted' with adhesive.
7) Place the new grip assembly on the
nozzle valve body and thread the
mounting screw into the screw hole
in the valve body.
8) Tighten the mounting screw to a
maximum torque of 100 in/lbs.
BALL DRIVER
100 IN•LB MAX.
WASHER
GRIP
SPACER
LOCTITE®
271
HM692BLK-KIT
BLACK GRIP
HM692BLU-KIT
BLUE GRIP
HM692GRY-KIT
GRAY GRIP
HM692GRN-KIT
GREEN GRIP
HM692ORG-KIT
ORANGE GRIP
HM692PNK-KIT
PINK GRIP
HM692PPL-KIT
PURPLE GRIP
HM692RED-KIT
RED GRIP
HM692TAN-KIT
TAN GRIP
HM692WHT-KIT
WHITE GRIP
HM692YEL-KIT YELLOW
GRIP
LTT-108 January 20, 2012 Rev07
©Copyright Task Force Tips 2010-1012
LIA-025 Foam Aspirator Manual
LTT-108 Instructions for Pistol Grip Replacement
