manualshive.com logo in svg

Task Force Tips MASTERSTREAM 1250S, Instructions For Installation, Safe Operation And Maintenance

Share
Download
Task Force Tips MASTERSTREAM 1250S Instructions For Installation, Safe Operation And Maintenance Download Page 2

©Copyright Task Force Tips, Inc. 1999 - 2011 

LIM-030 April 29, 2011 Rev13

2

DANGER

PERSONAL RESPONSIBILITY CODE

The member companies of FEMSA that provide emergency response 
equipment and services want responders to know and understand the 
following:

1. Firefi ghting and Emergency Response are inherently dangerous activities 

requiring proper training in their hazards and the use of extreme caution 
at all times.

2. It is your responsibility to read and understand any user’s instructions, 

including purpose and limitations, provided with any piece of equipment 
you may be called upon to use.

3. It is your responsibility to know that you have been properly trained in 

Firefi ghting and /or Emergency Response and in the use, precautions, and 
care of any equipment you may be called upon to use.

4. It is your responsibility to be in  proper physical condition and to maintain 

the personal skill level required to operate any equipment you may be 
called upon to use.

5. It is your responsibility to know that your equipment is in operable 

condition and has been maintained in accordance with the manufacturer’s 
instructions.

6. Failure to follow these guidelines may result in death, burns or other 

severe injury.

FEMSA

Fire and Emergency Manufacturers and Service Association

P.O. Box 147, Lynnfi eld, MA  01940 • www.FEMSA.org

Table Of Contents

1.0 MEANING OF SAFETY SIGNAL WORDS
2.0 GENERAL INFORMATION
 

2.1 

USE WITH SALT WATER

 2.2 VARIOUS 

MODELS 

AND 

TERM

 2.3 HYDRAULIC 

INSTALLATION

 2.4 ELECTRIC 

INSTALLATION

 2.5 PATTERN 

CONTROL

 

2.6 

USE WITH FOAM 

 

 

2.6.1  FOAMJET LX WITH MASTERSTREAM 1000 & 1250S NOZZLE

3.0 NOZZLE OPERATION
 

3.1 

AUTOMATIC NOZZLE OPERATION

 

 

3.1.1  FLOW CHARACTERISTICS OF MASTERSTREAM 1000 &1250S

 

 

3.1.2  FLOW CHARACTERISTICS OF MASTERSTREAM 1250, 1500, 2000 & MASTERSTREAM 4000

 

3.2 

FLOW CHARACTERISTICS OF 1000 SELECTABLE

 

3.3 

FLOW CHARACTERISTICS OF 1000 FIXED

 

3.4 

DETERMINING FLOW WITH PRE-PIPED MONITORS

 3.5 STREAM 

TRAJECTORY 

DATA

4.0 FLUSHING DEBRIS
5.0 MAINTENANCE
6.0 WARRANTY

Summary of Contents for MASTERSTREAM 1250S





















Reviews:

No comments

Brands by name

Popular brands

Load more brands