8
WARNING
Do not bend the copper tube other than the appropriate size.
The machine is only for 1/2 hard copper tube. Do not bend a hard copper tube.
Make sure to attach the guide pin.
【
If neglected
】
The machine may fail or cause an accident, resulting in an injury of the operator.
CAUTION
Make sure to support the copper tube during work.
【
If neglected
】
The end of the copper tube which is not fixed by the gear bender shall be weighted down
with one’s own weight. If it’s not be supported during work, the copper tube may deform
and the machine may also fail.
Therefore, we strongly recommend you to support the copper tube regardless of the tube
length.
OPTION
Adapter for Impact Driver
【
TA515M-D
】
●
Applicable for electric drivers with 45Nm or above.
●
Attached with 17mm socket for electric driver.
●
Easier to operate than with a ratchet wrench.
Pipe Supporting Stand for Bending Machine
【
TA515PY
】
●
Height:860
～
1200mm
●
for
φ
9
～
100mm copper tube
