Tasco TA515M Series Instruction Manual Download Page 11

 

10 

No.      

Warranty 

 
 
 

Terms of Warranty 

     1. This product is to be repaired free of charge if a failure occurs despite proper use during 

the period of warranty.   

     2. This warranty is valid for 1 year starting from the date of purchase. 
     3. In any of the following cases, this product is to be excluded from free-of-charge repair. 
          1) Failures incurred by improper use. 
           2) Failures due to handling and storage beyond its specifications. 
          3) Failures due to modifications  or repairs not done by the manufacturer or its 

entrusted technicians. 

          4) Failures due to consumable components. 
          5) Other failures not deemed to be the manufacturer’s responsibilities. 
 

Product Name: 

GEAR BENDER

 

Model: 

TA515M  series

 

Date of purchase: M:     /D:     /Y: 
Period of warranty: For 1 year starting from M:          /D:          /Y: 
Customer 

Name:                                                                             
 
Address:                                                                           
 
Phone number:                                                                     

Dealer 

Address and name:                                                                 

 

* To the dealer: Kindly take a few minutes and fill out the above form. 

 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for TA515M Series













Reviews: