Control parameters
Parameter list
This unit has the following parameters.
They can all be controlled using a dedicated app and from a TASCAM Sonicview Series unit.
Function
Notes
Head Amp GAIN adjustment
When Analog Reference Level = +6 dBu
When PAD OFF: +12 dB – +66 dB
When PAD ON: -8 dB – +46 dB
When Analog Reference Level = +4 dBu
When PAD OFF: +3 dB – +57 dB
When PAD ON: -17 dB – +37 dB
When Analog Reference Level = 0 dBu
When PAD OFF: +8 dB – +62 dB
When PAD ON: -12 dB – +42 dB
PAD ON/OFF
-20 dB when on
PHANTOM ON/OFF
+48V when on
Sampling rate setting
96 kHz (default)/48 kHz
Device name setting
Set/change the device name as desired
Channel label settings
Set/change channel names as desired
Switching the reference level
Digital reference level settings
-9 dBFs/-14 dBFs/-16 dBFs/-18 dBFs/-20dBFs (default)
Analog reference level settings
+6dBu (when -9dBFs)/+4dBu (default)/+0dBu
Indicator brightness adjustment
Setting range: 0–3 (default) (in 1 ms steps)
Identify
Makes all SIG and STATUS indicators on the unit blink
Network settings
(Dante Primary/Dante
Secondary/SB-16D unit)
Static/Auto (DHCP)
Automatic acquisition/manual setting for IP address
IP Address
IP address can be set/changed when “Static”
Subnet Mask
Subnet Mask can be set/changed when “Static”
Password setting
Set/change password as desired (no password by default)
GPIO setting
Set/change function assigned to GPIO connector
Preset setting
Set presets
GPIO connector overview
The GPIO connector on the back is a parallel control connector
for conducting external control of this unit.
In addition to external control of the SB-16D, GPIO connector
functions can also be set for use as extensions of the TASCAM
digital mixer GPIO connector. These can be set using the
TASCAM IO CONTROL app or a TASCAM digital mixer that
supports connection with this unit.
To use this unit by itself, see “GPIO settings” in the TASCAM IO
CONTROL reference manual.
When connected to a TASCAM Sonicview Series unit, this can be
done on the GPIO-IN and GPIO-OUT pages of the USER DEFINED
CONTROLS screen. For details, see “GPIO-IN page” and “GPIO-
OUT page” in “4 – Mixer configuration and other settings” of the
Reference Manual for the Sonicview Series unit.
The pin assignments are as follows.
Pin No.
Function
IN/OUT
1
GND
-
2
GPIO IN 2
IN
3
GPIO IN 4
IN
4
GPIO IN 6
IN
5
GPIO IN 8
IN
6
NC
-
7
NC
-
8
NC
-
9
GPIO OUT 2
OUT
10
GPIO OUT 4
OUT
Pin No.
Function
IN/OUT
11
GPIO OUT 6
OUT
12
GPIO OUT 8
OUT
13
NC
-
14
GPIO IN 1
IN
15
GPIO IN 3
IN
16
GPIO IN 5
IN
17
GPIO IN 7
IN
18
NC
-
19
NC
-
20
GND
-
21
GPIO OUT 1
OUT
22
GPIO OUT 3
OUT
23
GPIO OUT 5
OUT
24
GPIO OUT 7
OUT
25
+5V
-
IN: For command input
i
Internal circuit with +5V pull-up
i
Operates with low signal input of 50 msec or longer
OUT: For command and tally output
i
Internal circuit is open collector (10Ω output impedance)
i
20V dielectric strength, 35mA maximum current
+5V: 50mA maximum supplied current
TASCAM SB-16D
29
ENGLISH
