background image

< In the United States >

This warranty gives you specific legal rights and you may also have other 

rights which vary from state to state. This warranty is only valid within 

the country the unit was originally purchased.

WHAT IS COVERED AND WHAT IS NOT COVERED

Except as specified below, this warranty covers all defects in materials 

and workmanship in this product. The following are not covered by the 

warranty:

1. 

Damage to or deterioration of the external cabinet.

2. 

Damage resulting from accident, misuse, abuse or neglect.

3. 

Damage resulting from failure to perform basic daily maintenance 

and/or calibration or otherwise resulting from failure to follow 

instructions contained in your owner’s manual.

4. 

Damage occurring during shipment of the product. (Claims must be 

presented to the carrier)

5. 

Damage resulting from repair or attempted repair by anyone other 

than TEAC or an authorized TASCAM service station.

6. 

Damage resulting from causes other than product defects, including 

lack of technical skill, competence, or experience of the user.

7. 

Damage to any unit which has been altered or on which the serial 

number has been defaced, modified or is missing.

WHO IS COVERED UNDER THE WARRANTY

This warranty may be enforced only by the original purchaser. 

This warranty is not valid if the product was purchased through an 

unauthorized dealer.

LENGTH OF WARRANTY

All parts except heads and disk drives are warranted for one (1) year 

from the date of original purchase. Heads and disk drives are warranted 

for ninety (90) days from date of original purchase. Labor is warranted 

for ninety (90) days from date of original purchase.

WHAT WE WILL PAY FOR

We will pay all labor and material expenses for items covered by the 

warranty. Payment of shipping charges is discussed in the next section 

of this warranty.

HOW YOU CAN GET WARRANTY SERVICE

Your unit must be serviced by an authorized TASCAM service station in 

the United States. (This warranty is not enforceable outside the U.S.) If 

you are unable to locate an authorized TASCAM service station in your 

area, please contact us. We either will refer you to an authorized service 

station or instruct you to return the unit to the factory. Whenever 

warranty service is required, you must present a copy of the original 

dated sales receipt from an Authorized TASCAM Dealer.
You must pay any shipping charges if it is necessary to ship the product 

to service. However, if the necessary repairs are covered by the warranty, 

we will pay return surface shipping charges to any destination within 

the United States.

LIMITATION OF IMPLIED WARRANTIES

Any implied warranties, INCLUDING WARRANTIES OF MERCHANTABILITY 

AND FITNESS FOR A PARTICULAR PURPOSE, are limited in duration to the 

length of this warranty.

EXCLUSION OF DAMAGES

TEAC’s liability for any defective product is limited to repair or 

replacement of the product, at TEAC’s option. TEAC shall not be liable for:

1. 

Damages based upon inconvenience, loss of use of the product, loss 

of time interrupted operation or commercial loss; or

2. 

Any other damages, whether incidental, consequential or 

otherwise.

Some states do not allow limitations on how long an implied warranty 

lasts and/or do not allow the exclusion or limitation of incidental or 

consequential damages, so the above limitations and exclusions may 

not apply to you.

To locate an Authorized Service Center in Your 

Area

CALL 1-323-726-0303

< Europe >

This product is subject to the legal warranty regulations of the country 

of purchase. In case of a defect or a problem, please contact the dealer 

where you bought the product.
Ce produit est sujet aux réglementations concernant la garantie légale 

dans le pays d’achat. En cas de défaut ou de problème, veuillez contacter 

le revendeur chez qui vous avez acheté le produit.
Dieses Gerät unterliegt den gesetzlichen 

Gewährleistungsbestimmungen des Landes, in dem es erworben 

wurde. Bitte wenden Sie sich im Gewährleistungsfall an den Händler, 

bei dem sie das Gerät erworben haben.
Questo apparecchio è conforme alle norme sulla garanzia vigenti nel 

rispettivo Paese in cui esso è stato acquistato. Si prega di rivolgersi al 

proprio commerciante, presso il quale è stato acquistato l’apparecchio, 

nel caso in cui si voglia richiedere una prestazione in garanzia.
Las condiciones de garantía de este aparato están sujetas a las 

disposiciones legales sobre garantía del país en el que ha sido adquirido. 

En caso de garantía, debe dirigirse al establecimiento donde adquirió 

el aparato.

< In other countries/areas >

This warranty gives you specific legal rights, and you may also have 

other rights that vary by country, state or province.
If you have a warranty claim or request, please contact the dealer where 

you bought the product.

该保证书赋予了顾客特定的合法权利,并且因国家,州或

省等地域的不同,顾客可能拥有其他权利。如需申请或要

求保修,请与购买本产品的销售店进行联系。

If you require repair services for your TASCAM equipment, please contact 

the dealer where the product was purchased from or the TASCAM 

Distributor in your country. A list of TASCAM Distributors can be found 

on our website at: https://teac-global.com/

WARRANTY

Summary of Contents for SB-16D









































Reviews: