manualshive.com logo in svg

Tascam HS-2, Owner'S Manual, Page: 74 / 132

Share
Download
Tascam HS-2 Owner'S Manual Download Page 74

74

  TASCAM HS-2

Undoing the previous take edit (UNDO)

You can undo the previous take edit (divide/combine).
1  Press the HOME key to display the Home Screen.
2  Touch the 

EDIT

 button to display the pull-up menu.

Touch the 

UNDO

 button on the pull-up menu.

3  When the edit is undone, the Home Screen will be 

displayed after the pop-up window is displayed.

In this case, the 

EDIT

 pull-up menu will remain open.

NOTE

•  If no editing has been conducted, the 

UNDO

 button is 

disabled. The 

UNDO

 button appears with white letters 

when it is possible to undo an edit. 

•  The  take  mode  edit  history  will  be  erased  by  the 

following actions:

•  Turning off the power of this unit
•  Loading a project or session
•  Changing the operation mode
•  Recording

Redoing the previously undone take edit 

(REDO)

After undoing an edit, you can redo it.
1  Press the HOME key to display the Home Screen.
2  Touch the 

EDIT  MODE

 button to enter the edit 

mode.

3  Touch the 

EDIT

 button to display the pull-up menu.

Touch the 

REDO

 button on the pull-up menu.

4  Touch the 

REDO

 button on the pull-up menu. When 

the edit is redone, the Home Screen will be dis-

played after the pop-up window is displayed.

In this case, the 

EDIT

 pull-up menu will remain open.

NOTE

•  If  no  edit  has  been  undone,  the 

REDO

  button  is 

disabled. The 

REDO

 button appears with white letters 

when it is possible to redo an edit. 

•  The  take  mode  edit  history  will  be  erased  by  the 

following actions:

•  Turning off the power of this unit
•  Loading a project or session
•  Changing the operation mode
•  Recording

8–Take mode

Summary of Contents for HS-2





































































































































Reviews:

No comments