TASCAM DR-05X
27
4 – Recording
Conducting overdubbing
1.
Press the RECORD [
0
] button to begin recording
standby.
The overdubbing ON/OFF pop-up appears.
2.
Use the + or − button to select
ON
from the overdubbing
ON/OFF pop-up. (Default:
OFF
)
3.
Press the RECORD [
0
] button to start overdubbing.
Overdubbing will start.
When recording starts, the REC indicator lights and the
display shows the elapsed and remaining recording
times.
The following error message appears if the selected file
cannot be played back.
4.
To stop recording, press the
¤
(HOME) [
8
] button.
Recording automatically (AUTO REC)
This function starts and pauses recording, starts new files,
and sets marks automatically according to the input signal
level.
1.
Press the MENU button to open the
MENU
screen.
2.
Use the + or – button to select (highlight) the
REC
SETTING
menu item, and press the
7
button.
The
REC SETTING
screen opens.
3.
Use the + or – button to select (highlight) the
MODE
item,
and press the
/
or
7
button.
4.
Use the + or - button to set the
AUTO REC
mode.
OFF
(Default):
Off
NEW FILE
: Records and pauses automatically
MARK
: Sets marks automatically during recording
5.
Press the
.
button to enable selection of settings.
6.
Use the + or – button to select (highlight) the
LEVEL
item, and press the
/
or
7
button.
7.
Use the + or – button to set the level that signal is
judged to have been input to
-6dB
,
-12dB
(default),
-24dB
or
-48dB
.
8.
After completing the setting, press the
¤
(HOME) [
8
]
button to return to the Home Screen.
9.
Press the RECORD [
0
] button to begin recording
standby.
Recording starts automatically when the input signal
exceeds the
LEVEL
setting.
