background image

3 - Menu functions

20

  TASCAM DA-45HR

3.11HR time display

When recording or playing back in the 

HR(24BIT)

 

mode, the tape moves at twice the normal speed. The 
tape counter can use the subcode recorded on the 
tape as its reference, meaning that the displayed time 
passes twice as fast as real time, or it can display real 
time. 

The selected display mode is used in PGM Time 
mode and REMAIN Time mode (see 

COUNTER 

MODE [21]

). A * symbol appears at the top of the 

display when real time mode is selected.

The options available in this menu are: 

TapeTM

 

(using the ABS time in the tape subcode), or 

RealTM

 (using real time for the tape counter).

The default value is 

TapeTM

.

NOTE

This menu item only applies to tapes 
recorded in the HR mode; it has no relevance 
to tapes recorded in standard mode.

3.12Repeat mode

This menu item controls the number of times that the 
playback will repeat when the repeat mode is set (see 
4.1, "REPEAT").

The options available are: 

10TMS

 (the playback 

will repeat 10 times) and 

UnLimt

 (the playback 

will repeat indefinitely until stopped).

The default value is 

10TMS

.

3.13Pre-roll time

Sets a pre-roll time, so that the tape will locate to a 
fixed point before either of the location memories 
when the appropriate key (

LOC 1 [29]

 or 

LOC 2 

[30]

) is pressed. The setting made here has no effect 

on locating to the START IDs of programs using the 

SKIP

 keys 

[12]

 or the 

DATA

 dial 

[20]

.

The values available are: 

0

1

2

3

4

 and 

5

 

seconds.

The default value is 

0

 seconds.

3.14End tally signal

Controls the timing of the tape end tally signal trans-
mitted through the 

CONTROL I/O [36]

 port. The 

signal can either be transmitted at the end of the tape, 
or at a fixed interval before the tape end.

The values available are: 

T-End

 (the tally signal 

will be transmitted at the end of the tape), 

1min

,  

2min

 and 

3min

 (the tally signal will be trans-

mitted before the end of the tape is reached).

The default value is 

T-End

.

3.15Auto rewind

This menu item determines whether the tape will be 
automatically rewound when the end of the tape or 
an END ID is reached in play mode.

The two options available are: 

off

 (the tape will 

not be rewound when the end of the tape or an END 
ID is reached) and 

on

 (the tape will be automati-

cally rewound when the end of the tape or an END 
ID is reached).

The default value is 

off

.

3.16Fast forward mode

This menu item determines whether the F FWD and 
REW keys will act as cue and review keys, respec-
tively, if they are pressed while the tape deck is in 
play mode. The two settings are 

Normal

 (the 

unit will go from play mode to fast wind) and 

Cue

 

(the unit will enter cue/review mode when the fast 
wind keys are pressed).

The setting made here also applies to fast wind com-
mands made through the 

CONTROL I/O [36]

 con-

nector, and using the optional RC-D45 remote 
control unit.

The default value is 

Normal

.

H

R

-

T

M

T

a

p

e

T

M

R

e

p

e

a

t

1

0

T

M

S

P

r

e

R

o

l

0

s

e

c

E

n

d

T

L

Y

T

-

E

n

d

A

t

-

R

e

w

o

f

f

F

F

-

K

e

y

N

o

r

m

a l

Summary of Contents for DA-45HR

































Reviews:

Related manuals for DA-45HR