background image

40 

TASCAM CD-9010CF

7 – Managing CF cards

Ripping CD tracks to CF cards

You can rip (convert and copy) audio from audio CDs to CF cards. 

The audio from CDs is converted into and written as WAV files. 
The following procedures assume that the current device is set 

to 

CD

, and the CD with the track that you want to copy and a CF 

card are loaded. 

1.  Press the 

MENU

 button to open the 

MENU

 screen. 

2.  Open the 

CF

 menu screen. 

3.  Select 

RIP CD

4.  Press the DATA dial.
 

The words 

--MEDIA READING--

  and a progress bar appear 

in a pop-up. 

NOTE

If a CF is not loaded, after MEDIA READING, --ERROR-- and CF 

READ appear in a pop-up. Insert a CF card.

5.  After a CF card has been completely loaded, the 

RIP SOURCE SELECT

 

screen opens. 

6.  Turn the 

DATA

 dial to select the source track to be copied. 

 

Select 

CD-DA DISC

 to select the entire disc as the source. 

 

The remaining available space on the CF card is shown at 
the top right of the screen. 

7.   After selecting the tracks to copy, press the 

DATA

 dial to 

confirm the selection. 

 

The 

RIP TARGET SELECT

 screen opens where you can select 

the destination for the copied tracks opens. 

NOTE

When selecting source files, if the size of the ripped data would 

exceed the remaining capacity of the CF card, or the number of 

source tracks would cause the number of files to exceed the CF 

card limit, CAPACITY OVER or TRACK FULL will appear and you 

will not be able to continue to step 8.

8.  

On the 

RIP TARGET SELECT

 screen, turn the 

DATA

 dial to 

select the destination for the copied tracks (a folder)  and 
press the DATA dial to open it. Then turn the 

DATA

 dial 

and select 

-RIP HERE-

 in the first line of a folder to select 

it as the destination folder. 

9.   With 

-RIP HERE-

 selected, press the 

DATA

 dial to confirm 

the destination. A confirmation pop-up message appears. 

10.   Press the DATA dial again to start writing to the CF card.  

During this process, 

-- RIPPING --

  and a progress bar 

appear in a pop-up. 

 

When writing is complete, the CD menu screen reopens.

Summary of Contents for CD-9010CF

























































Reviews: