background image

TASCAM CD-9010CF

 21

4 – Playback

Monitoring and online playback

This unit has two playback modes: monitoring playback and 

online playback. The outputs for the two playback modes can be 

set to be independent of each other. 
For example, you can use the monitoring playback mode for 

broadcast use and on location to cue tracks and playback points 

in advance to prepare for online playback from those points. 

Monitoring playback

The 

SYSTEM

 menu 

ONLINE FUNCTION

 item must be set to 

SWTCH.

OK

 to enable monitoring playback. (See "Setting the online 

function" on page 42.) 

NOTE

If set as above, pushing the PLAY button will output the 

• 

playback signal to the monitoring destination. 
If set as above, the playback signal will be output to the 

• 

monitoring destination when jogging and searching. 

Starting monitoring playback 
When stopped, in playback standby or during jog playback, 

press the MONITOR button. 
Status of outputs

Output 

Status

DIGITAL OUTPUT 

Off 

LINE OUTPUTS 

Off 

MONITOR OUTPUTS 

On

Online playback

The 

SYSTEM

 menu screen 

ONLINE FUNCTION

 item must be set to 

AlwaysON

 to enable online playback. (See "Setting the online 

function" on page 42.) 
Starting online playback
When in playback standby, monitoring playback or during jog 

playback, press the PLAY button. 
Status of outputs

Output 

Status

DIGITAL OUTPUT 

On

LINE OUTPUTS 

On

MONITOR OUTPUTS 

Off 

NOTE

Set the SYSTEM menu MON MUTE ONLINE item to OFF to always 

send the signal through the MONITOR OUTPUTS. (See "Muting 

monitoring when online" on page 45.) 

Setting the playback mode

Tracks on the current device can be played using one of the 

following three playback modes.
Continuous playback mode (default setting) 

The 

• 

 indicator appears in the playback mode 

area of the Home Screen. 
The tracks on the current device are played in track number 

• 

order.

Single playback mode 

The 

• 

indicator appears in the playback mode 

area of the Home Screen. 
Only the currently selected track is played before playback 

• 

stops.

Program playback mode 

The 

• 

indicator appears in the playback mode 

area of the Home Screen.
Tracks will be played in the order programmed in advance. 

• 

(See “Program playback” on page 29.) 

The current playback mode appears in the playback mode area 

of the Home Screen. 
Use the PLAY MODE button to set the playback mode. 
Press this button to cycle through the playback modes in the 

following order.

CONTINUE mode

SINGLE mode

PROGRAM mode

NOTE

In this manual, unless otherwise specified, explana-

• 

tions assume that the playback mode is set to CONTINUE 

(continuous playback mode). 
The playback mode setting is retained even when the power 

• 

is turned OFF. 

Summary of Contents for CD-9010CF

























































Reviews: