background image

TASCAM  CD-601MKII

 

3

Important Safety Instructions

 

1

  Read these instructions.

 

2

 Keep 

these 

instructions.

 

3

  Heed all warnings.

 

4

  Follow all instructions.

 

5

  Do not use this apparatus near water.

 

6

  Clean only with dry cloth.

 

7

  Do not block any ventilation openings. Install in accordance 

with the manufacturer's instructions.

 

8

  Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifi ers) 
that produce heat.

 

9

  Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided 
plug does not fi t into your outlet, consult an electrician for 
replacement of the obsolete outlet.

 

10

  Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point 
where they exit from the apparatus.

 

11

  Only use attachments/accessories specified by the 

manufacturer.

 

12

  Use only with the cart, stand, tripod, bracket, or table 

specifi ed by the manufacturer, or sold with the apparatus. 
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.

 

13

  Unplug this apparatus during lightning storms or when 

unused for long periods of time.

 

14

  Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normally, 
or has been dropped.

•  Do not expose this apparatus to drips or splashes.

•  Do not place any objects filled with liquids, such as 

vases, on the apparatus.

•  Do not install this apparatus in a confined space such as 

a book case or similar unit.

•  The apparatus draws nominal non-operating power from 

the AC outlet with its POWER switch in the off position.

•  The apparatus should be located close enough to the AC 

outlet so that you can easily grasp the power cord plug at 
any time.

•  Apparatus with Class I construction shall be connected 

to an AC outlet with a protective grounding connection.

CD-601MKII_Eng.indd   3

3/26/2005   7:39:43 PM

Summary of Contents for CD-601MKII































Reviews: