background image

TASCAM  CD-601MKII

 

23

OTHER FUNCTIONS & SETTINGS

Referencing to an External Clock Source

The CD player can be operated referenced to an external 
digital clock. 

1  Connect the word clock from an external source to the 

WORD SYNC IN

 terminal on the rear panel.

2  Set menu No. 04 (“CLOCK”) to “EXT”. 
 

EXT CLK

” and the sampling frequency (“44.1k” or “48k”) are 

lit on the clock display area of the display area. 

The default setting is “INT” (referenced to internal clock). 

Failsafe Function

The failsafe function is a safety function for preventing 
playback from discontinuation when an operation key is 
touched inadvertently during a final take. 

In the default setting, the failsafe function is ON, and 
operation of keys other than 

STOP

PLAY MODE

 and 

DISP 

MODE

 is not accepted during online playback. Also, in the 

online READY mode, operation of search-related keys such 
as the 

TRACK

 key and numeric keys and the 

MENU

 key is 

not accepted. 

When the failsafe function is set to OFF (“OFF”) using menu 
No. 10 (“F_SAFE”), all keys (excluding the 

SEARCH

 key 

during online playback) are functional. 

Displaying the End of Track Warning

The end of track warning (EOM = End of Message) can be 
displayed in the display window in the online playback and 
monitor playback modes. (In the default setting, the warning 
is not displayed.) 

When the end of track warning is set to be displayed, the 
countdown to the end of the track is displayed. 

Set the end of track warning display using menu No. 11 
(“EOM”). 

OFF

 (default setting): The end of track warning is not 

displayed.

10, 15, 20, 30, 60, 90

: The countdown display starts from 

the end of the track by the preset 
number of seconds.

Switching the Time Display

Each press of the 

DISP MODE

 key during playback 

switches the time information in the display window. As the 
default setting, the time display mode is switched between 
“track elapsed time” and “track remaining time.”

The type of time display that is switches using the 

DISP 

MODE

 key can be selected in menu No. 19 (“TIME”). 

Selections are displayed at 1 to 4.

1 (default setting): Track elapsed time 

 track remaining 

time

2 : Track elapsed time 

 track remaining time 

 disc 

remaining time

3 : Track elapsed time 

 track remaining time 

 disc 

remaining time 

 disc total time

4 : Track elapsed time 

 track remaining time 

 disc 

remaining time 

 disc total time « track time

The current time display mode is displayed as follows at the 
top of the display window.

Track elapsed time 

: (no display)

Track remaining time 

REMAIN

 is lit.

Disc remaining time 

TOTAL REMAIN

 is lit.

Disc total time 

TOTAL

 is lit.

Track time 

TOTAL

 blinks.

z

  The time display setting is backed up on the CD player. 

So, the same setting is reproduced when the CD player 
is next turned ON. 

[

NOTE

]

•  While disc operations are stopped, the disc total time is 

displayed.

CD-601MKII_Eng.indd   23

3/26/2005   7:39:54 PM

Summary of Contents for CD-601MKII































Reviews: