background image

TASCAM  CD-601MKII

 

19

MENU OPERATIONS

Saving Menu Settings

Settings made to each of the menu items can be saved to 
user banks. 

Five user banks (U1 to U5) are provided, and menu 
settings when the CD player is turned OFF are stored to the 
currently selected user bank. 

You will find it more convenient to save optimum menu 
settings to individual user banks depending on your specific 
work requirements. 

The user bank can be selected by using menu No. 22 
(“USER”). 

Selection

: U1 (default setting) to U5, PRE

When the CD player is turned ON, the menu settings saved 
to the currently selected user bank are reproduced. When 
PRE is selected, all menu settings are returned to their 
defaults.

When a user bank is changed using the above menu item 
(“USER”) during operations, the menu settings change to 
those of the newly selected user bank. (The CD player need 
not be turned OFF then back ON again.)

Clearing Menu Settings

The menu settings currently saved to a user bank can be 
cleared to return them to their defaults. User banks can be 
batch-cleared or cleared individually.

Clearing all user banks

Set menu No. 22 to “PRE” and use menu No. 21 (“A_CLR”) 
to clear all user banks. 

When menu No. 21 (“A_CLR”) is selected, the message 
“SURE?” will be displayed. Press the 

ENTER

 key to clear 

the user banks. 

All menu settings currently saved to user banks (U1 to U5) 
will be cleared and returned to their defaults.

[

NOTE

]

•  W h e n  R e m o t e  C o n t r o l  U n i t  R C - 6 0 1 M K I I  ( s o l d 

separately) is used, a memory clear also clears the disc 
information of memory banks (A to E).

Clearing individual user banks

1  Select the user bank to be cleared in menu No. 22.

2  Simultaneously press the 

+

 and 

-

 keys.

CD-601MKII_Eng.indd   19

3/26/2005   7:39:51 PM

Summary of Contents for CD-601MKII































Reviews: