background image

 

TASCAM CD-500/500B

  

17

Connecting analog audio equipment

Connect the analog inputs of stereo amplifiers, mixers, 

recorders and other analog equipment to this unit’s 

analog output connectors.

NOTE

Cables are not included with this unit

Using parallel control (CD-500B only)

To use an external controller for parallel control of the 

CD-500B, use the 

CONTROL I/O PARALLEL

 connector 

(D-Sub 15-pin). For the pin assignments of the PARALLEL 

connector, see “Using the parallel connector [CD-500B 

only]” on page 32. 

Preparing the remote control 

Inserting batteries

1   Open the cover on the back of the remote control. 

2  Insert two AAA batteries with the correct ± 

orientations. 

3  Close the cover. 

NOTE

The batteries are not supplied for Taiwan.

When to replace the batteries

Replace both batteries with new ones when the range 

of the remote control becomes short or if the buttons 

become unresponsive.

Precautions about using batteries

Misuse of batteries could cause them to leak, rupture or 

otherwise be damaged. Please read and abide by the 

precautions on the battery labels when using them. See 

page 4 of this manual for additional precautions.

Precautions about using the remote 

control

When using other devices controlled by infrared rays, 

• 

use of this remote control might operate these devices 

by mistake.
Use the remote control within the following range.

• 

Remote sensor

15° 15°

Operation distance

Directly in front: Within 7 meters

15° left or right: Within 7 meters

Remote control reception 

settings

Operation of the unit using the remote control can be 

disabled in order to prevent misoperation.
Use the 

15 IR

 menu item to set whether or not the unit 

can be operated by remote control (default value: 

ON

). 

NOTE

If remote control reception has been set to 

• 

OFF

IR 

OFF

 will appear on the display when any of the remote 

control buttons are pushed.
The remote control reception setting (on/off) is saved 

• 

even if the unit’s power is turned off. 

3 – Preparation

Summary of Contents for CD-500









































Reviews: