34
TASCAM CD-200i
ª
DIGITAL OUTPUT (COAXIAL) Terminal
Connector: RCA Pin Jack
Compatible Signal Format: IEC-60958 Type II (S/PDIF)
ª
Video Output
Connector: RCA Pin Jack
Compatible Signal Format: Composite video signal
Output Impedance: 75Ω
ª
S-VIDEO Output
Connector: 4-pin mini-DIN connector
Compatible Signal Format: Separate video signal
Audio performance (CD playback)
Frequency Response: 20 Hz - 20 kHz ±1.0 dB
Signal-to-Noise Ratio (S/N): More than 90 dB (20 kHz LPF
+ A-weighted)
Dynamic Range: More than 90 dB (20 kHz LPF +
A-weighted)
Total Harmonic Distortion: Less than 0.01% (1 kHz, 20
kHz LPF)
Channel Separation: More than 90 dB (1 kHz, 1 kHz BPF)
Backup memory
The following settings are backed up even when the unit
power is turned off. “(CD)” means that the settings are
backed up when the output source is set to CD.
•
Time and title display settings (CD)
•
Playback mode (CD)
•
Program (for loaded CD)
•
Current folder (for loaded CD)
•
Output source setting
•
Repeat setting (CD)
•
Pitch control ON/OFF (CD)
•
Pitch control value (CD)
Ratings
ª
Compatible disc formats
CD-DA (12-cm/8-cm), CD-ROM (12-cm/8-cm) ISO 9660
LEVEL 1/2/ROMEO/JOLIET format (CD-R/CD-RW DISC
compatible)
ª
Playable format
Audio CD (CD-DA),
MPEG1 Audio Layer III (MP3)
WAV
ª
MP3 playback specifications
Audio Mode: STEREO/JOINT STEREO/DUAL
CHANNEL/MONO
Sampling Frequency: 32 kHz/44.1 kHz/48 kHz
Bit Rate: 32 kbps - 320 kbps, and VBR
ª
WAV playback specifications
Sampling Frequency: 8 kHz/11.025 kHz/12 kHz/16
kHz/22.05 kHz/24 kHz/32 kHz/44.1 kHz/48 kHz
Sampling Bit Rate: 8 bit/16 bit
ª
Audio CD playback specifications
Sampling Frequency: 44.1 kHz
Sampling Bit Rate: 16 bit
Number of Channels: 2
Input/Output ratings
ª
AUX IN (UNBALANCED) Jack
Connector: 3.5 mm stereo mini jack
Reference Input Level: –16 dBV
Maximum Input Level: 0 dBV
Input impedance: 22 kΩ
ª
ANALOG OUTPUT (UNBALANCED) Terminal
Connector: RCA pin jack
CD Reference Output Level: –10 dBV
CD Maximum Output Level: +6 dBV
Output Impedance: 200Ω
ª
PHONES Jack
Connector: Standard Stereo Jack
Maximum Output Level: 20 mW + 20 mW
Load Impedance: 32Ω
ª
DIGITAL OUTPUT (OPTICAL) Terminal
Connector: Optical Jack
Compatible Signal Format: IEC-60958 Type II (S/PDIF)
8 − Specifications
