26
TASCAM CD-200i
4 − Playing Back CDs
• To select programmed playback, press the PLAY
MODE/INTRO CHECK (SOURCE SEL) key on the main
unit or the PLAY MODE key on the remote control
when playback is stopped or no CD is loaded.
• During folder playback, only tracks in the current
folder can be included in a program.
Setting the program
When no program is set, follow the procedures below to set
a program using the remote control.
• The program cannot be set from the main unit.
• You can set a program at any time regardless of the
current playback mode.
• The program is cleared when the disc tray is opened.
1 Press the
PROGRAM EDIT
key while playback is
stopped.
PROGRAM
EDIT key
The unit enters program setting mode, and if no program
has been set, it will be possible to set a track to program
step 01 (
MEMORY
indicator blinks).
[Audio CD]
[Data CD]
If the program is already set, the track number and
playback time of the track set as program step 01 is
shown.
2 Use the numeric keys or search (
Ô
/
Â
,
¯
/
)
keys to select a track to set as program step 01.
(The
MEMORY
indicator and the track number blink.)
When using the numeric keys, input the number
starting with the leftmost digit.
Program step
Playback time
Track number
[Audio CD]
[Data CD]
• When using a data CD, the screen switches to
file name display if more than a second passes
after pressing a numeric key or search (
Ô
/
Â
,
¯
/
) key, but it is still possible to add the track
to the program.
• If you press the STOP key while a track is selected,
selection of that track is canceled, and the screen
returns to the state where you can select a track.
3 Press the
PROGRAM EDIT
key.
The selected track is added to program step 01. The unit
is now ready for you to add another track for the next
program step.
4 By repeating steps two and three above, you can add
more tracks sequentially as desired.
5 If you are finished adding tracks to the program,
press the
PROGRAM EDIT
key when the empty
program step where it is possible to add a track
appears. The unit exits program setting mode.
• The same track can be added to the program
multiple times.
