background image

 TASCAM CC-222MKII 

Owner’s Manual

 

3

IMPORTANT SAFETY INSTRUCTIONS

1

Read these instructions.

2

Keep these instructions.

3

Heed all warnings.

4

Follow all instructions.

5

Do not use this apparatus near water.

6

Clean only with dry cloth.

7

Do not block any ventilation openings. Install in 
accordance with the manufacturer’s instructions.

8

Do not install near any heat sources such as radi-
ators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat.

9

Do not defeat the safety purpose of the polarized 
or grounding-type plug. A polarized plug has 
two blades with one wider than the other. 
Grounding type plug has two blades and a third 
grounding prong. The wide blade or the third 
prong are provided for your safety. If the pro-
vided plug does not fit into your outlet, consult 
an electrician for replacement of the obsolete 
outlet.

10

Protect the power cord from being walked on or 
pinched, particularly at plugs, convenience 
receptacles, and the point where they exit from 
the apparatus.

11

Only use attachments/accessories specified by 
the manufacturer.

12

Use only with the cart, stand, tripod, bracket, or 
table specified by the manufacturer or sold with 
the apparatus. When a cart is used, use caution 
when moving the cart/apparatus combination to 
avoid injury from tip-over.

13

Unplug this apparatus during lightning storms or 
when unused for long periods of time. 

14

Refer all servicing to qualified service person-
nel. Servicing is required when the apparatus has 
been damaged in any way, such as power-supply 
cord or plug is damaged, liquid has been spilled 
or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, 
does not operate normally, or has been dropped.

Do not expose this apparatus to drips or 
splashes.

Do not place any objects filled with liquids, such 
as vases, on the apparatus.

Do not install this apparatus in a confined space 
such as a book case or similar unit.

Summary of Contents for CC-222MKII









































Reviews: