background image

TASCAM  CC-222MKIII

 1

Dubbing to tape from the middle of a CD

The above procedure describes the playback and 
recording from the start of a disc (or the start of a pro-
grammed playback list).

To record from a point other than the ones above:

1  Locate the disc to the point where the playback is 

to start.

2  Press the disc 

PAUSE

 key to pause playback at 

the point where the playback is to start.

3  If recording is to start at the beginning of the 

cassette, make sure the cassette is stopped, other-
wise, locate the cassette to the appropriate posi-
tion where recording is to start, and enter record 
standby mode.

 

Using the headphones with the 

MONITOR

 switch 

set to 

MIX

 will help here.

4  Press the 

DUB 2

 key. Playback starts on the disc, 

and recording starts on the cassette.

Recording tapes from the PHONO deck

To record from an external record deck connected 
through the 

RIAA PHONO

 inputs:

1  Prepare for recording as described above (load a 

tape, set the REV MODE, etc.).

2  Press the 

MENU

 key until the 

PHONO > XXX 

menu item is shown.

 

Turning the 

MULTI DIAL

 or pressing the 

SKIP

 

keys on the remote control to select either 

TAPE

.

 

Press the 

MULTI DIAL

 or 

ENTER

 on the remote 

control unit.

3  Press the 

PHONO

 key. The 

PhONO

 indicator lights 

on the display.

 

If the tape is currently in stop mode, the tape 
rewinds, and the deck enters record standby 
mode (about eight seconds from the start of the 
cassette, to allow for leader tape).

 

If the tape deck is already in record standby 
mode, it will remain in record standby mode.

4  Start playback of the record.

5  Start recording with either the 

PLAY

 or 

PAUSE

 

key.

 

Press 

STOP

 (cassette deck) to stop the recording. 

The 

STOP

 key is the only key which is enabled 

during phono recording.

NOTE

It is not possible to perform phono recording as 
described above under the following circumstanc-
es: a tape is not loaded or the tape is write-protect-
ed (the phono to tape function is disabled with no 
recordable tape inserted), or the tape is not either 
stopped or in record standby mode.

Only recording as described above is possible from 
the 

RIAA PHONO

 sources to tape. Manual record-

ing is not possible.

7- Cassette operations

 Cassette operations

sette is write-protected, or if the CD is a recordable 
disc which does not currently have any material 
recorded on it.

It is also not possible to enter the dubbing mode if 
the tape is not in stop or record standby mode, or if 
the CD is not in stop or pause mode.

Summary of Contents for CC-222MK





































Reviews: