Tascam 208i Series, Reference Manual

Page: 19 / 38

TASCAM SERIES 102i / SERIES 208i
19
5 - Using the Settings Panel
LINK button overview
When a LINK button on the MIXER page is turned on/off, the settings differ according to whether the stereo link is on or off.
The details of the settings are as follows.
When a LINK button is turned on
Button/knob Setting status
Select buttons
On if a Select button was on (lit)
for either channel.
Off if the Select buttons were off
(unlit) for both channels.
φ (phase) buttons
Settings are not combined.
Both channels retain their
previous settings.
THRU buttons
The setting of the odd channel is
used for both.
EQ buttons
The setting of the odd channel is
used for both.
COMP buttons
The setting of the odd channel is
used for both.
PRE
/
POST
buttons
The setting of the odd channel is
used for both.
AUX
knobs
(
1
–
4
)
The setting of the odd channel is
used for both.
SOLO buttons
The setting of the odd channel is
used for both.
MUTE buttons
The setting of the odd channel is
used for both.
Pan sliders
Settings are not combined.
Odd and even channels can each
be set independently.
Channel faders
The setting of the odd channel is
used for both.
Channel level meters
The channel level meters are
shown as a stereo pair.
Fader level display areas
The setting of the odd channel is
shown.
NOTE
When a
LINK
button is on (lit), the select button names
change to a name used when the stereo link is active.
Examples
When the INPUT 1 and INPUT 2 buttons are linked, the
name of the button changes to INPUT 1-2 .
When a LINK button is turned off
Button/knob Setting status
Select buttons
When on (lit), the odd channel
will be turned on and the even
channel will be turned off.
When off (unlit), both channels
will be turned off.
φ (phase) buttons
Settings do not change. Both
channels retain their previous
settings.
THRU buttons
Both channels use the settings
they shared when stereo-linked.
EQ buttons
Both channels use the settings
they shared when stereo-linked.
COMP buttons
Both channels use the settings
they shared when stereo-linked.
PRE
/
POST
buttons
Both channels use the settings
they shared when stereo-linked.
AUX knobs (1-4)
Both channels use the settings
they shared when stereo-linked.
SOLO buttons
Both channels use the settings
they shared when stereo-linked.
MUTE buttons
Both channels use the settings
they shared when stereo-linked.
Pan sliders
Both channels use the settings
they shared when stereo-linked.
Channel faders
Both channels use the settings
they shared when stereo-linked.
Channel level meters
The channel level meters switch
to showing mono signals.
Fader level display areas
Both channels use the settings
they shared when stereo-linked.